GST HSN Chapter 72

Iron and steel

This chapter covers iron and steel such as pig iron, ferro-alloys, ferrous products obtained by direct reduction of iron ore, etc.

Simple Summary

Chapter 72 covers Iron and steel.

What is NOT covered?

This chapter excludes Articles of iron or steel (Chapter 73).

UQC Guidance

KGS / MT

GST Rate Summary

Generally 18%.

HSN Codes in this Chapter

Type below to narrow down your search

HSN Code Description Action
72 Iron and steel Use
7201 PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS Use
720110 NON-ALLOY PIG IRON CONTAINING BY WEIGHT 0.5% OR LESS OF PHOSPHORUS Use
72011000 NON-ALLOY PIG IRON CONTAINING BY WEIGHT 0.5% OR LESS OF PHOSPHORUS Use
720120 NON-ALLOY PIG IRON CONTAINING BY WEIGHT MORE THAN 0.5% OF PHOSPHORUS Use
72012000 NON-ALLOY PIG IRON CONTAINING BY WEIGHT MORE THAN 0.5% OF PHOSPHORUS Use
720150 ALLOY PIG IRON, SPIEGELEISEN : Use
72015010 CAST IRON Use
72015090 OTHER Use
7202 FERRO-ALLOYS Use
720211 CONTAINING BY WEIGHT MORE THAN 2% OF CARBON Use
72021100 CONTAINING BY WEIGHT MORE THAN 2% OF CARBON Use
720219 OTHER Use
72021900 OTHER Use
720221 CONTAINING BY WEIGHT MORE THAN 55% OF SILICON Use
72022100 CONTAINING BY WEIGHT MORE THAN 55% OF SILICON Use
720229 OTHER Use
72022900 OTHER Use
720230 FERRO-SILICO-MANGANESE Use
72023000 FERRO-SILICO-MANGANESE Use
720241 CONTAINING BY WEIGHT MORE THAN 4% OF CARBON Use
72024100 CONTAINING BY WEIGHT MORE THAN 4% OF CARBON Use
720249 OTHER Use
72024900 OTHER Use
720250 FERRO-SILICO-CHROMIUM Use
72025000 FERRO-SILICO-CHROMIUM Use
720260 FERRO-NICKEL Use
72026000 FERRO-NICKEL Use
720270 FERRO-MOLYBDENUM Use
72027000 FERRO-MOLYBDENUM Use
720280 FERRO TUNGSTEN AND FERRO-SILICO-TUNGSTEN Use
72028000 FERRO TUNGSTEN AND FERRO-SILICO-TUNGSTEN Use
720291 FERRO-TITANIUM AND FERRO-SILICO-TITANIUM Use
72029100 FERRO-TITANIUM AND FERRO-SILICO-TITANIUM Use
720292 FERRO-VANADIUM Use
72029200 FERRO-VANADIUM Use
720293 FERRO-NIOBIUM Use
72029300 FERRO-NIOBIUM Use
720299 OTHER : Use
72029911 FERRO-PHOSPHORUS Use
72029912 FERRO-SELENIUM Use
72029913 FERRO-COBALT Use
72029914 FERRO-COLUMBIUM Use
72029915 FERRO-ZIRCONIUM Use
72029916 FERRO-TANTALUM Use
72029921 FERRO-SILICO-ZIRCONIUM Use
72029922 FERRO-SILICO-MAGNESIUM Use
72029931 FERRO-BORON Use
72029932 CHARGE-CHROME Use
72029990 OTHER Use
7203 FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS Use
720310 FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE Use
72031000 FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE Use
720390 OTHER Use
72039000 OTHER Use
7204 FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR STEEL Use
720410 WASTE AND SCRAP OF CAST IRON Use
72041000 WASTE AND SCRAP OF CAST IRON Use
720421 OF STAINLESS STEEL : Use
72042110 EMPTY OR DISCHARGED CARTRIDGES OF ALL BORES AND SIZES Use
72042190 OTHER Use
720429 OTHER : Use
72042910 EMPTY OR DISCHARGED CARTRIDGES OF ALL BORES AND SIZES Use
72042920 OF HIGH SPEED STEEL Use
72042990 OTHER Use
720430 WASTE AND SCRAP OF TINNED IRON OR STEEL Use
72043000 WASTE AND SCRAP OF TINNED IRON OR STEEL Use
720441 TURNINGS, SHAVINGS, CHIPS, MILLING WASTE, SAW DUST, FILLINGS, TRIMMINGS AND STAMPINGS, WHETHER OR NOT IN BUNDLES Use
72044100 TURNINGS, SHAVINGS, CHIPS, MILLING WASTE, SAW DUST, FILLINGS, TRIMMINGS AND STAMPINGS, WHETHER OR NOT IN BUNDLES Use
720449 OTHER Use
72044900 OTHER Use
720450 REMELTING SCRAP INGOTS Use
72045000 REMELTING SCRAP INGOTS Use
7205 GRANULES AND POWDERS, OF PIG IRON, SPIEGELEISEN, IRON OR STEEL Use
720510 GRANULES : Use
72051011 SHOT AND ANGULAR GRIT Use
72051012 WIRE PELLETS Use
72051019 OTHER Use
72051021 SHOT AND ANGULAR GRIT Use
72051022 WIRE PELLETS Use
72051029 OTHER Use
72051090 OTHER Use
720521 OF ALLOY STEEL Use
72052100 OF ALLOY STEEL Use
720529 OTHER : Use
72052910 OF IRON Use
72052990 OTHER Use
7206 IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS (EXCLUDING IRON OF HEADING 7203) Use
720610 INGOTS : Use
72061010 OF IRON Use
72061020 OF HIGH CARBON STEEL Use
72061090 OTHER Use
720690 OTHER : Use
72069011 PUDDLED BARS AND PILINGS Use
72069012 BLOCKS, LUMPS AND SIMILAR FORMS Use
72069019 OTHER Use
72069091 PUDDLED BARS AND PILINGS Use
72069092 BLOCKS, LUMPS AND SIMILAR FORMS Use
72069099 OTHER Use
7207 SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL Use
720711 OF RECTANGULAR (INCLUDING SQUARE) CROSS-SECTION, THE WIDTH MEASURING LESS THAN TWICE THE THICKNESS : Use
72071110 ELECTRICAL QUALITY Use
72071120 FORGING QUALITY Use
72071130 SEAMLESS STEEL TUBE QUALITY Use
72071190 OTHER Use
720712 OTHER, OF RECTANGULAR (OTHER THAN SQUARE) CROSS-SECTION : Use
72071210 ELECTRICAL QUALITY Use
72071220 FORGING QUALITY Use
72071230 SEAMLESS STEEL TUBE QUALITY Use
72071290 OTHER Use
720719 OTHER : Use
72071910 FORGED BLANKS OF NON-ALLOY STEEL Use
72071920 MILD STEEL BILLETS Use
72071990 OTHER Use
720720 CONTAINING BY WEIGHT 0.25% OR MORE OF CARBON : Use
72072010 FORGING QUALITY Use
72072020 SPRING STEEL QUALITY Use
72072030 SEAMLESS STEEL TUBE QUALITY Use
72072090 OTHER Use
7208 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, HOT-ROLLED, NOT CLAD, PLATED OR COATED Use
720810 IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, WITH PATTERNS IN RELIEF Use
72081000 IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, WITH PATTERNS IN RELIEF Use
720825 OF A THICKNESS OF 4.75 MM OR MORE : Use
72082510 PLATES Use
72082520 UNIVERSAL PLATES Use
72082530 SHEETS Use
72082540 STRIP Use
72082590 OTHER Use
720826 OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4.75 MM : Use
72082610 PLATES Use
72082620 UNIVERSAL PLATES Use
72082630 SHEETS Use
72082640 STRIP Use
72082690 OTHER Use
720827 OF A THICKNESS OF LESS THAN 3 MM : Use
72082710 PLATES Use
72082720 UNIVERSAL PLATES Use
72082730 SHEETS Use
72082740 STRIP Use
72082790 OTHER Use
720836 OF A THICKNESS EXCEEDING 10 MM : Use
72083610 PLATES Use
72083620 UNIVERSAL PLATES Use
72083630 SHEETS Use
72083640 STRIP Use
72083690 OTHER Use
720837 OF A THICKNESS OF 4.75 MM OR MORE BUT NOT EXCEEDING 10 MM : Use
72083710 PLATES Use
72083720 UNIVERSAL PLATES Use
72083730 SHEETS Use
72083740 STRIP Use
72083790 OTHER Use
720838 OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4.75 MM : Use
72083810 PLATES Use
72083820 UNIVERSAL PLATES Use
72083830 SHEETS Use
72083840 STRIP Use
72083890 OTHER Use
720839 OF A THICKNESS OF LESS THAN 3 MM : Use
72083910 PLATES Use
72083920 UNIVERSAL PLATES Use
72083930 SHEETS Use
72083940 STRIP Use
72083990 OTHER Use
720840 NOT IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, WITH PATTERNS IN RELIEF : Use
72084010 PLATES Use
72084020 UNIVERSAL PLATES Use
72084030 SHEETS Use
72084040 STRIP Use
72084090 OTHER Use
720851 OF A THICKNESS EXCEEDING 10 MM : Use
72085110 PLATES Use
72085120 UNIVERSAL PLATES Use
72085130 SHEETS Use
72085140 STRIP Use
72085190 OTHER Use
720852 OF A THICKNESS OF 4.75 MM OR MORE BUT NOT EXCEEDING 10 MM : Use
72085210 PLATES Use
72085220 UNIVERSAL PLATES Use
72085230 SHEETS Use
72085240 STRIP Use
72085290 OTHER Use
720853 OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4.75 MM : Use
72085310 PLATES Use
72085320 UNIVERSAL PLATES Use
72085330 SHEETS Use
72085340 STRIP Use
72085390 OTHER Use
720854 OF A THICKNESS OF LESS THAN 3 MM : Use
72085410 PLATES Use
72085420 UNIVERSAL PLATES Use
72085430 SHEETS Use
72085440 STRIP Use
72085490 OTHER Use
720890 OTHER Use
72089000 OTHER Use
7209 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, COLD- ROLLED (COLD-REDUCED), NOT CLAD, PLATED OR COATED Use
720915 OF A THICKNESS OF 3 MM OR MORE : Use
72091510 PLATES Use
72091520 SHEETS Use
72091530 STRIP Use
72091590 OTHER Use
720916 OF A THICKNESS EXCEEDING 1 MM BUT LESS THAN 3 MM : Use
72091610 PLATES Use
72091620 SHEETS Use
72091630 STRIP Use
72091690 OTHER Use
720917 OF A THICKNESS OF 0.5 MM OR MORE BUT NOT EXCEEDING 1 MM : Use
72091710 PLATES Use
72091720 SHEETS Use
72091730 STRIP Use
72091790 OTHER Use
720918 OF A THICKNESS OF LESS THAN 0.5 MM : Use
72091810 PLATES Use
72091820 SHEETS Use
72091830 STRIP Use
72091890 OTHER Use
720925 OF A THICKNESS OF 3 MM OR MORE : Use
72092510 PLATES Use
72092520 SHEETS Use
72092530 STRIP Use
72092590 OTHER Use
720926 OF A THICKNESS EXCEEDING 1MM BUT LESS THAN 3 MM: Use
72092610 PLATES Use
72092620 SHEETS Use
72092630 STRIP Use
72092690 OTHER Use
720927 OF A THICKNESS OF 0.5 MM OR MORE BUT NOT EXCEEDING 1 MM : Use
72092710 PLATES Use
72092720 SHEETS Use
72092730 STRIP Use
72092790 OTHER Use
720928 OF A THICKNESS OF LESS THAN 0.5 MM : Use
72092810 PLATES Use
72092820 SHEETS Use
72092830 STRIP Use
72092890 OTHER Use
720990 OTHER Use
72099000 OTHER Use
7210 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD, PLATED OR COATED Use
721011 OF A THICKNESS OF 0.5 MM OR MORE : Use
72101110 OTS/MR TYPE Use
72101190 OTHER Use
721012 OF A THICKNESS OF LESS THAN 0.5 MM: Use
72101210 OTS/MR TYPE Use
72101290 OTHER Use
721020 PLATED OR COATED WITH LEAD, INCLUDING TERNE-PLATE Use
72102000 PLATED OR COATED WITH LEAD, INCLUDING TERNE-PLATE Use
721030 Electrolytically plated or coated with zinc : Use
72103010 CORRUGATED Use
72103090 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD, PLATED OR COATED - ELECTROLYTICALLY PLATED OR COATED WITH ZINC :OTHER Use
72103091 Galvannealed Use
72103099 Other Use
721041 CORRUGATED Use
72104100 CORRUGATED Use
721049 Other: Use
72104900 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD, PLATED OR COATED - OTHERWISE PLATED OR COATED WITH ZINC : OTHER Use
72104910 Galvannealed Use
72104990 Other Use
721050 PLATED OR COATED WITH CHROMIUM OXIDES OR WITH CHROMIUM AND CHROMIUM OXIDES Use
72105000 PLATED OR COATED WITH CHROMIUM OXIDES OR WITH CHROMIUM AND CHROMIUM OXIDES Use
721061 PLATED OR COATED WITH ALUMINIUM-ZINC ALLOYS Use
72106100 PLATED OR COATED WITH ALUMINIUM-ZINC ALLOYS Use
721069 OTHER Use
72106900 OTHER Use
721070 PAINTED, VARNISHED OR COATED WITH PLASTICS Use
72107000 PAINTED, VARNISHED OR COATED WITH PLASTICS Use
721090 OTHER : Use
72109010 LACQUERED Use
72109090 OTHER Use
7211 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, NOT CLAD, PLATED OR COATED Use
721113 ROLLED ON FOUR FACES OR IN A CLOSED BOX PASS, OF A WIDTH EXCEEDING 150 MM AND A THICKNESS OF NOT LESS THAN 4 MM, NOT IN COILS AND WITHOUT PATTERNS IN RELIEF Use
72111300 ROLLED ON FOUR FACES OR IN A CLOSED BOX PASS, OF A WIDTH EXCEEDING 150 MM AND A THICKNESS OF NOT LESS THAN 4 MM, NOT IN COILS AND WITHOUT PATTERNS IN RELIEF Use
721114 OTHER, OF A THICKNESS OF 4.75 MM OR MORE : Use
72111410 FLATS Use
72111420 UNIVERSAL PLATES Use
72111430 HOOPS Use
72111440 SHEETS Use
72111450 STRIP Use
72111460 SKELP Use
72111490 OTHER Use
721119 OTHER : Use
72111910 FLATS Use
72111920 UNIVERSAL PLATES Use
72111930 HOOPS Use
72111940 SHEETS Use
72111950 STRIP Use
72111960 SKELP Use
72111990 OTHER Use
721123 CONTAINING BY WEIGHT LESS THAN 0.25% OF CARBON: Use
72112310 FLATS Use
72112320 UNIVERSAL PLATES Use
72112330 HOOPS Use
72112340 SHEETS Use
72112350 STRIP Use
72112390 OTHER Use
721129 OTHER : Use
72112910 FLATS Use
72112920 UNIVERSAL PLATES Use
72112930 HOOPS Use
72112940 SHEETS Use
72112950 STRIP Use
72112960 SKELP Use
72112990 OTHER Use
721190 OTHER : Use
72119011 OF BOILER QUALITY Use
72119012 OF HIGH TENSILE QUALITY Use
72119013 OF SHIP BUILDING QUALITY Use
72119090 OTHER Use
7212 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED OR COATED Use
721210 PLATED OR COATED WITH TIN : Use
72121010 OTS OR MR TYPE Use
72121090 OTHER Use
721220 Electrolytically plated or coated with zinc : Use
72122010 CORRUGATED Use
72122090 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED OR COATED - ELECTROLYTICALLY PLATED OR COATED WITH ZINC : OTHER Use
72122091 Galvannealed Use
721230 Otherwise plated or coated with zinc : Use
72123010 CORRUGATED Use
72123090 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED OR COATED - OTHERWISE PLATED OR COATED WITH ZINC : OTHER Use
72123091 Galvannealed Use
72123099 Other Use
721240 PAINTED, VARNISHED OR COATED WITH PLASTICS Use
72124000 PAINTED, VARNISHED OR COATED WITH PLASTICS Use
721250 OTHERWISE PLATED OR COATED : Use
72125010 PLATED OR COATED WITH LEAD Use
72125020 LACQUERED Use
72125030 Plated or coated with aluminium Use
72125040 Plated or coated with aluminium-zinc alloys Use
72125090 OTHER Use
721260 CLAD Use
72126000 CLAD Use
7213 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL Use
721310 CONTAINING INDENTATIONS, RIBS, GROOVES OR OTHER DEFORMATIONS PRODUCED DURING THE ROLLING PROCESS : Use
72131010 OF FREE CUTTING STEEL Use
72131090 OTHER Use
721320 OTHER, OF FREE-CUTTING STEEL : Use
72132010 ELECTRODE QUALITY Use
72132020 COLD HEADING QUALITY Use
72132090 OTHER Use
721391 OF CIRCULAR CROSS-SECTION MEASURING LESS THAN 14 MM IN DIAMETER : Use
72139110 ELECTRODE QUALITY Use
72139120 COLD HEADING QUALITY Use
72139190 OTHER Use
721399 OTHER : Use
72139910 ELECTRODE QUALITY Use
72139920 COLD HEADING QUALITY Use
72139990 OTHER Use
7214 OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL, NOT FURTHER WORKED THAN FORGED, HOT-ROLLED, HOT-DRAWN OR HOT-EXTRUDED, BUT INCLUDING THOSE TWISTED AFTER ROLLING Use
721410 FORGED : Use
72141010 SPRING STEEL QUALITY Use
72141090 OTHER Use
721420 CONTAINING INDENTATIONS, RIBS, GROOVES OR OTHER DEFORMATIONS PRODUCED DURING THE ROLLING PROCESS OR TWISTED AFTER ROLLING : Use
72142010 SPRING STEEL QUALITY Use
72142090 OTHER Use
721430 OTHER, OF FREE CUTTING STEEL Use
72143000 OTHER, OF FREE CUTTING STEEL Use
721491 OF RECTANGULAR (OTHER THAN SQUARE) CROSS-SECTION : Use
72149110 MILD STEEL BRIGHT BAR Use
72149190 OTHER Use
721499 OTHER : Use
72149910 OF SPRING STEEL QUALITY Use
72149990 OTHER Use
7215 OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL Use
721510 OF FREE-CUTTING STEEL, NOT FURTHER WORKED THAN COLD FORMED OR COLD-FINISHED Use
72151000 OF FREE-CUTTING STEEL, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED Use
721550 OTHER, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED : Use
72155010 MILD STEEL BRIGHT BAR Use
72155090 OTHER Use
721590 OTHER : Use
72159010 PLATED OR COATED WITH ZINC Use
72159020 PLATED OR COATED WITH OTHER BASE METALS Use
72159090 OTHER Use
7216 ANGLES, SHAPES AND SECTIONS OF IRON OR NON-ALLOY STEEL Use
721610 U, I OR H SECTIONS, NOT FURTHER WORKED THAN HOT- ROLLED,HOT-DRAWN OR EXTRUDED, OF A HEIGHT OF LESS THAN 80 MM Use
72161000 U, I OR H SECTIONS, NOT FURTHER WORKED THAN HOT- ROLLED,HOT-DRAWN OR EXTRUDED, OF A HEIGHT OF LESS THAN 80 MM Use
721621 L SECTIONS Use
72162100 L SECTIONS Use
721622 T SECTIONS Use
72162200 T SECTIONS Use
721631 U SECTIONS Use
72163100 U SECTIONS Use
721632 I SECTIONS Use
72163200 I SECTIONS Use
721633 H SECTIONS Use
72163300 H SECTIONS Use
721640 L OR T SECTIONS, NOT FURTHER WORKED THAN HOT ROLLED, HOT-DRAWN OR EXTRUDED, OF A HEIGHT OF 80 MM OR MORE Use
72164000 L OR T SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, OF A HEIGHT OF 80 MM OR MORE Use
721650 OTHER ANGLES, SHAPES AND SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED Use
72165000 OTHER ANGLES, SHAPES AND SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED Use
721661 OBTAINED FROM FLAT-ROLLED PRODUCTS Use
72166100 OBTAINED FROM FLAT-ROLLED PRODUCTS Use
721669 OTHER Use
72166900 OTHER Use
721691 COLD-FORMED OR COLD-FINISHED FROM FLAT ROLLED PRODUCTS Use
72169100 COLD-FORMED OR COLD-FINISHED FROM FLAT ROLLED PRODUCTS Use
721699 OTHER : Use
72169910 PLATED OR COATED WITH ZINC Use
72169920 PLATED OR COATED WITH BASE METALS OTHER THAN ZINC Use
72169930 SLOTTED ANGLES AND SLOTTED CHANNELS Use
72169940 FORGED Use
72169990 OTHER Use
7217 WIRE OF IRON OR NON-ALLOY STEEL Use
721710 NOT PLATED OR COATED, WHETHER OR NOT POLISHED : Use
72171010 OF A THICKNESS OF 18 SWG AND BELOW Use
72171020 OF A THICKNESS ABOVE 18 SWG BUT UP TO 26 SWG Use
72171030 OF A THICKNESS ABOVE 26 SWG Use
721720 PLATED OR COATED WITH ZINC : Use
72172010 OF A THICKNESS OF 18 SWG AND BELOW Use
72172020 OF A THICKNESS ABOVE 18 SWG BUT UP TO 26 SWG Use
72172030 OF A THICKNESS ABOVE 26 SWG Use
721730 PLATED OR COATED WITH OTHER BASE METALS : Use
72173010 OF A THICKNESS OF 18 SWG AND BELOW Use
72173020 OF A THICKNESS ABOVE 18 SWG BUT UP TO 26 SWG Use
72173030 OF A THICKNESS ABOVE 26 SWG Use
721790 OTHER : Use
72179011 OF CROSS SECTION – HALF ROUND Use
72179012 OF CROSS SECTION – FLAT AND RECTANGULAR Use
72179013 OF CROSS SECTION – 'Z' SHAPED Use
72179019 OF CROSS SECTION – OTHER SHAPES Use
72179091 HIGH TENSILE QUALITY Use
72179092 ELECTRODE QUALITY Use
72179093 ELECTRIC RESISTANCE WIRE (INCLUDING ELECTRIC HEATING WIRE) RESISTANCE Use
72179099 OTHER Use
7218 STAINLESS STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF STAINLESS STEEL Use
721810 INGOTS AND OTHER PRIMARY FORMS Use
72181000 INGOTS AND OTHER PRIMARY FORMS Use
721891 OF RECTANGULAR (OTHER THAN SQUARE) CROSS-SECTION Use
72189100 OF RECTANGULAR (OTHER THAN SQUARE) CROSS-SECTION Use
721899 OTHER : Use
72189910 BILLETS Use
72189990 OTHER Use
7219 FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF 600 MM OR MORE Use
721911 OF A THICKNESS EXCEEDING 10 MM : Use
72191111 NOT EXCEEDING 14 MM Use
72191112 EXCEEDING 14 MM Use
72191190 OTHER Use
721912 OF A THICKNESS OF 4.75 MM OR MORE BUT NOT EXCEEDING 10 MM Use
72191200 OF A THICKNESS OF 4.75 MM OR MORE BUT NOT EXCEEDING 10 MM Use
721913 OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4.75 MM Use
72191300 OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4.75 MM Use
721914 OF A THICKNESS OF LESS THAN 3 MM Use
72191400 OF A THICKNESS OF LESS THAN 3 MM Use
721921 OF A THICKNESS EXCEEDING 10 MM : Use
72192111 NOT EXCEEDING 14 MM Use
72192112 EXCEEDING 14 MM Use
72192121 NOT EXCEEDING 14 MM Use
72192122 EXCEEDING 14 MM Use
72192131 NOT EXCEEDING 14 MM Use
72192132 EXCEEDING 14 MM Use
72192141 NOT EXCEEDING 14 MM Use
72192142 EXCEEDING 14 MM Use
72192190 OTHER Use
721922 OF A THICKNESS OF 4.75 MM OR MORE BUT NOT EXCEEDING 10 MM : Use
72192211 CHROMIUM TYPE Use
72192212 NICKEL CHROMIUM AUSTENITIC TYPE Use
72192219 OTHER Use
72192291 CHROMIUM TYPE Use
72192292 NICKEL CHROMIUM AUSTENITIC TYPE Use
72192299 OTHER Use
721923 OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4.75 MM : Use
72192310 CHROMIUM TYPE Use
72192320 NICKEL CHROMIUM AUSTENITIC TYPE Use
72192390 OTHER Use
721924 OF A THICKNESS OF LESS THAN 3 MM : Use
72192411 BELOW 0.35 MM Use
72192412 0.35 MM AND ABOVE BUT BELOW 0.56 MM Use
72192413 0.56 MM AND ABOVE BUT BELOW 0.90 MM Use
72192419 OTHER Use
72192421 BELOW 0.35 MM Use
72192422 0.35 MM AND ABOVE BUT BELOW 0.56 MM Use
72192423 0.56 MM AND ABOVE BUT BELOW 0.90 MM Use
72192429 OTHER Use
72192490 OTHER Use
721931 OF A THICKNESS OF 4.75 MM OR MORE : Use
72193111 NOT EXCEEDING 14 MM Use
72193112 EXCEEDING 14 MM Use
72193121 NOT EXCEEDING 14 MM Use
72193122 EXCEEDING 14 MM Use
72193190 OTHER Use
721932 OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4.75 MM : Use
72193210 CHROMIUM TYPE Use
72193220 NICKEL CHROMIUM AUSTENITIC TYPE Use
72193290 OTHER Use
721933 OF A THICKNESS EXCEEDING 1 MM BUT LESS THAN 3 MM : Use
72193310 CHROMIUM TYPE Use
72193320 NICKEL CHROMIUM AUSTENITIC TYPE Use
72193390 OTHER Use
721934 OF A THICKNESS OF 0.5 MM OR MORE BUT NOT EXCEEDING 1 MM : Use
72193410 CHROMIUM TYPE Use
72193420 NICKEL CHROMIUM AUSTENITIC TYPE Use
72193490 OTHER Use
721935 OF A THICKNESS OF LESS THAN 0.5 MM : Use
72193510 CHROMIUM TYPE Use
72193520 NICKEL CHROMIUM AUSTENITIC TYPE Use
72193590 OTHER Use
721990 OTHER : Use
72199011 THICKNESS MORE THAN 4.75 MM Use
72199012 THICKNESS 3 MM TO 4.75 MM Use
72199013 THICKNESS LESS THAN 3 MM Use
72199090 OTHER Use
7220 FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF LESS THAN 600 MM Use
722011 OF A THICKNESS OF 4.75 MM OR MORE : Use
72201110 SKELP FOR PIPES AND TUBES Use
72201121 CHROMIUM TYPE Use
72201122 NICKEL CHROMIUM AUSTENITIC TYPE Use
72201129 OTHER Use
72201190 OTHER Use
722012 OF A THICKNESS OF LESS THAN 4.75 MM : Use
72201210 SKELP FOR PIPES AND TUBES Use
72201221 CHROMIUM TYPE Use
72201222 NICKEL CHROMIUM AUSTENITIC TYPE Use
72201229 OTHER Use
72201290 OTHER Use
722020 NOT FURTHER WORKED THAN COLD-ROLLED (COLD REDUCED) : Use
72202010 SKELP FOR PIPES AND TUBES Use
72202021 CHROMIUM TYPE Use
72202022 NICKEL CHROMIUM AUSTENITIC TYPE Use
72202029 OTHER Use
72202090 OTHER Use
722090 OTHER : Use
72209010 SKELP (STRIPS FOR PIPES AND TUBES) Use
72209021 CHROMIUM TYPE Use
72209022 NICKEL CHROMIUM AUSTENITIC TYPE Use
72209029 OTHER Use
72209090 OTHER Use
7221 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL Use
722100 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL : Use
72210011 CHROMIUM TYPE Use
72210012 NICKEL CHROMIUM AUSTENITIC TYPE Use
72210019 OTHER Use
72210090 OTHER Use
7222 OTHER BARS AND RODS OF STAINLESS STEEL, ANGLES, SHAPES AND SECTIONS OF STAINLESS STEEL Use
722211 OF CIRCULAR CROSS SECTION : Use
72221111 CHROMIUM TYPE Use
72221112 NICKEL CHROMIUM AUSTENITIC TYPE Use
72221119 OTHER Use
72221191 CHROMIUM TYPE Use
72221192 NICKEL CHROMIUM AUSTENITIC TYPE Use
72221199 OTHER Use
722219 OTHER : Use
72221911 CHROMIUM TYPE Use
72221912 NICKEL CHROMIUM AUSTENITIC TYPE Use
72221919 OTHER Use
72221991 CHROMIUM TYPE Use
72221992 NICKEL CHROMIUM AUSTENITIC TYPE Use
72221999 OTHER Use
722220 BARS AND RODS, NOT FURTHER WORKED THAN COLD FORMED OR COLD-FINISHED : Use
72222011 CHROMIUM TYPE Use
72222012 NICKEL CHROMIUM AUSTENITIC TYPE Use
72222019 OTHER Use
72222091 CHROMIUM TYPE Use
72222092 NICKEL CHROMIUM AUSTENITIC TYPE Use
72222099 OTHER Use
722230 OTHER BARS AND RODS : Use
72223011 CHROMIUM TYPE Use
72223012 NICKEL CHROMIUM AUSTENITIC TYPE Use
72223019 OTHER Use
72223091 CHROMIUM TYPE Use
72223092 NICKEL CHROMIUM AUSTENITIC TYPE Use
72223099 OTHER Use
722240 ANGLES, SHAPES AND SECTIONS : Use
72224010 OF THICKNESS OF 80 MM AND ABOVE Use
72224020 OF BELOW 80 MM Use
7223 WIRE OF STAINLESS STEEL Use
722300 WIRE OF STAINLESS STEEL : Use
72230010 ELECTRODE QUALITY Use
72230091 OF THICKNESS OF ABOVE 1.5 MM Use
72230092 OF THICKNESS OF 0.46 MM AND ABOVE BUT NOT EXCEEDING 1.5 MM Use
72230099 OF THICKNESS OF BELOW 0.46 MM Use
7224 OTHER ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF OTHER ALLOY STEEL Use
722410 INGOTS AND OTHER PRIMARY FORMS Use
72241000 INGOTS AND OTHER PRIMARY FORMS Use
722490 OTHER : Use
72249010 OF TOOL STEEL QUALITY Use
72249020 OF DIE STEEL QUALITY Use
72249030 OF COBALT BEARING HIGH SPEED STEEL QUALITY Use
72249040 FORGED BLANKS OF ALLOY STEEL Use
72249091 BILLETS Use
72249099 OTHER Use
7225 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE Use
722511 GRAIN-ORIENTED Use
72251100 GRAIN-ORIENTED Use
722519 Other Use
72251910 HOT ROLLED Use
72251920 COLD ROLLED Use
72251990 OTHER Use
72252011 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE - OF HIGH SPEED STEEL : HOT-ROLLED : IN COILS Use
72252019 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE - OF HIGH SPEED STEEL : HOT-ROLLED : NOT IN COILS Use
72252021 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE - OF HIGH SPEED STEEL : COLD-ROLLED : IN COILS Use
72252029 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE - OF HIGH SPEED STEEL : COLD-ROLLED : NOT IN COILS Use
722530 OTHER, NOT FURTHER WORKED THAN HOT-ROLLED, IN COILS : Use
72253010 OF SPRING STEEL QUALITY Use
72253090 OTHER Use
722540 OTHER, NOT FURTHER WORKED THAN HOT-ROLLED, NOT IN COILS : Use
72254011 BOILER QUALITY Use
72254012 PRESSURE VESSEL QUALITY Use
72254013 HIGH TENSILE QUALITY Use
72254019 OTHER Use
72254020 OF A THICKNESS OF 3 MM AND ABOVE BUT NOT EXCEEDING 4.75 MM Use
72254030 OF A THICKNESS OF BELOW 3 MM Use
722550 OTHER, NOT FURTHER WORKED THAN COLD-ROLLED (COLD-REDUCED) : Use
72255010 OF A THICKNESS OF LESS THAN 3 MM Use
72255020 OF A THICKNESS OF 3 MM TO 4.75 MM Use
72255030 OF A THICKNESS OF ABOVE 4.75 MM Use
722591 ELECTROLYTICALLY PLATED OR COATED WITH ZINC: Use
72259100 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE - OTHER : ELECTROLYTICALLY PLATED OR COATED WITH ZINC Use
72259110 Galvannealed Use
72259190 Other Use
722592 OTHERWISE PLATED OR COATED WITH ZINC: Use
72259200 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE - OTHER : OTHERWISE PLATED OR COATED WITH ZINC Use
72259210 Galvannealed Use
72259290 OTHER Use
722599 OTHER: Use
72259900 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE - OTHER : OTHER Use
72259910 plated or coated with aluminium Use
72259920 plated or coated with aluminium-zinc alloys Use
72259930 painted, coloured or coated with plastics Use
72259990 Other Use
7226 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM Use
722611 GRAIN-ORIENTED Use
72261100 GRAIN-ORIENTED Use
722619 Other Use
72261910 HOT ROLLED Use
72261920 COLD ROLLED Use
72261990 OTHER Use
722620 OF HIGH SPEED STEEL : Use
72262011 IN COILS Use
72262012 OTHER Use
72262021 IN COILS Use
72262022 OTHER Use
72262030 HOOPS AND STRIPS Use
722691 NOT FURTHER WORKED THAN HOT-ROLLED : Use
72269110 OF A THICKNESS OF BELOW 3 MM Use
72269120 OF A THICKNESS OF 3 MM AND ABOVE BUT NOT EXCEEDING 4.75 MM Use
72269130 HIGH TENSILE QUALITY OF A THICKNESS OF ABOVE 4.75 MM Use
72269190 OTHER Use
722692 NOT FURTHER WORKED THAN COLD-ROLLED (COLD REDUCED) : Use
72269210 OF A THICKNESS OF BELOW 3 MM Use
72269220 OF A THICKNESS OF 3 MM AND ABOVE BUT NOT EXCEEDING 4.75 MM Use
72269230 OF A THICKNESS OF ABOVE 4.75 MM Use
72269300 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM - OTHER: ELECTROLYTICALLY PLATED OR COATED WITH ZINC Use
72269400 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM - OTHER: OTHERWISE PLATED OR COATED WITH ZINC Use
722699 Other : Use
72269910 OF A THICKNESS OF ABOVE 4.75 MM Use
72269920 OF A THICKNESS OF ABOVE 3 MM AND BUT NOT EXCEEDING 4.75 MM Use
72269930 OF A THICKNESS OF BELOW 3 MM Use
72269940 SKELP (STRIPS FOR PIPES AND TUBES) Use
72269951 HOT ROLLED Use
72269952 COLD ROLLED Use
72269953 OF SPRING STEEL, OTHER THAN SKELP Use
72269960 SKELPS AND STRIPS FOR RAZOR BLADES AND SAW BLADES Use
72269971 PLAIN AND CORRUGATED Use
72269972 electrolytically, plain and corrugated Use
72269973 GALVANNEALED Use
72269979 OTHER Use
72269981 with aluminium Use
72269982 with aluminium-zinc alloys Use
72269983 painted, coloured or coated with plastics Use
72269989 Other Use
72269990 OTHER Use
7227 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF OTHER ALLOY STEEL Use
722710 OF HIGH SPEED STEEL Use
72271000 OF HIGH SPEED STEEL Use
722720 OF SILICO-MANGANESE STEEL Use
72272000 OF SILICO-MANGANESE STEEL Use
722790 OTHER : Use
72279010 VALVE SPRING STEEL QUALITY Use
72279020 OTHER SPRING STEEL QUALITY Use
72279030 BALL BEARING QUALITY Use
72279040 COLD HEADING QUALITY Use
72279050 LEAD-FREE CUTTING QUALITY Use
72279060 SULPHUR FREE CUTTING QUALITY Use
72279090 OTHER Use
7228 OTHER BARS AND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL Use
722810 BARS AND RODS, OF HIGH SPEED STEEL : Use
72281010 BRIGHT BARS Use
72281090 OTHER Use
722820 BARS AND RODS, OF SILICO-MANGANESE STEEL Use
72282000 BARS AND RODS, OF SILICO-MANGANESE STEEL Use
722830 OTHER BARS AND RODS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED : Use
72283011 OF ALLOY TOOL STEEL Use
72283019 OTHER Use
72283021 LEAD BEARING STEEL Use
72283022 SPRING STEEL Use
72283023 SULPHUR BEARING STEEL Use
72283024 TOOL AND DIE STEEL Use
72283029 OTHER Use
722840 OTHER BARS AND RODS, NOT FURTHER WORKED THAN FORGED Use
72284000 OTHER BARS AND RODS, NOT FURTHER WORKED THAN FORGED Use
722850 OTHER BARS AND RODS, NOT FURTHER WORKED THAN COLD FORMED OR COLD-FINISHED : Use
72285010 OF ENGINE VALVES AND COLD HEADING STEEL Use
72285090 OTHER Use
722860 OTHER BARS AND RODS : Use
72286011 OF ALLOY TOOL STEEL Use
72286012 OTHER Use
72286091 LEAD BEARING STEEL Use
72286092 SPRING STEEL Use
72286093 SULPHUR BEARING STEEL Use
72286094 TOOL AND DIE STEEL Use
72286099 OTHER Use
722870 ANGLES, SHAPES AND SECTIONS : Use
72287011 OF 80 MM OR MORE Use
72287012 OF LESS THAN 80 MM Use
72287021 OF 80 MM OR MORE Use
72287022 OF LESS THAN 80 MM Use
722880 HOLLOW DRILL BARS AND RODS : Use
72288010 OF ALLOY STEEL Use
72288020 OF NON ALLOY STEEL, FORGED Use
72288090 OTHER Use
7229 WIRE OF OTHER ALLOY STEEL Use
72291000 WIRE OF OTHER ALLOY STEEL OF HIGH SPEED STEEL Use
722920 OF SILICO-MANGANESE STEEL Use
72292000 OF SILICO-MANGANESE STEEL Use
722990 OTHER : Use
72299011 TINNED WIRE Use
72299012 BRONZE COATED WIRE Use
72299013 TRAPEZOIDAL WIRE Use
72299014 HALF ROUND WIRE Use
72299015 CRIMPED WIRE Use
72299016 COPPER COATED WIRE Use
72299021 ELECTRODE QUALITY Use
72299022 WIRE ROPE QUALITY Use
72299023 ACSR QUALITY Use
72299031 WIRE (EXCLUDING WIRE TYPE LEAD) Use
72299032 SPRING WIRE Use
72299033 HIGH TENSILE WIRE Use
72299034 HARDENED AND TEMPERED WIRE Use
72299040 OTHER WIRE Use
72299051 HALF ROUND Use
72299052 FLAT AND RECTANGULAR Use
72299053 L' SHAPE Use
72299054 Z' SHAPE Use
72299059 OTHER Use
72299060 ELECTRIC RESISTANCE WIRE (INCLUDING ELECTRIC RESISTANCE HEATING WIRE) Use
72299070 CRIMPED WIRE Use
72299090 OTHER Use
Previous
Chapter 71
Next
Chapter 73